Enviro Safetech provides the following services for clients using lasers:

A- Laser Safety training for Laser Safety Officers (LSO), Laser users and service personnel

B- Written laser safety program in compliance with ANSI and OSHA requirements

C- Laser Safety Officer services (site inspections, personal protective equipment selection)

D- Laser signs and labels customized to laser tools in area as required by ANSI

To schedule laser safety training, audits or to receive a full training proposal please contact:

Jay Jamali at 408-943-9090 or email us at: jayjam@envirosafetech.com

Enviro Safetech provides on site laser safety training throughout the United States, South America, Europe and Asia.

Course Duration:

• The Level I Laser Safety Awareness class is a 1-hour class for employees working in areas where lasers are used.
• The Level II Laser Safety class for laser users is 2 hours in length*
• The Level III Laser Safety class for service personnel requires one additional hour (to Level I)*
• The Level IV Laser Safety Officer (LSO) Certification Course is a 4-day (32 hours) course*.

*In order to become certified you must pass the class exam with 70% proficiency or better.

The LSO course is designed for Safety and Health professionals as well as Facilities personnel responsible for laser safety at their organization.

This is a practical rather than theory course. The objective of the course is to train attendees on their responsibilities as LSOs and provide them with resources to develop and implement a laser safety program.

Topics covered in the Laser Safety Officer (LSO)* class are as follows:

1-Regulations associated with laser safety:

....a) ANSI

....b) OSHA

....c) FDA

2-Laser classifications

3-Laser hazards (Eye, skin, collateral)

4-Personal Protective Equipment (selection and maintenance)

5-Engineering Controls (eg.. Laser curtains)

6-Administrative controls

7-Written laser safety program development and updating

....A-Sample written laser safety program will be provided

8-Training requirements

....A-Sample training packet will also be provided.

9-Laser labeling requirements

10-Medical surveillance protocol

11-Servicing operation safety

12-Exposure Limits (MPE)

13-Emergency procedures

14-Lockout Tagout and Electrical Safety

*In order to become certified you must pass the class exam with 70% proficiency or better.